5
English
MEANINGS
OF
SYMBOLS
NOTE:
Some units do not carry them
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their
meaning before use.
It is important that you read, fully
understand and observe the
following safety precautions and
warnings. Careless or improper
use of the unit may cause serious
or fatal injury.
Shows maximum shaft
speed. Do not use the cutting
attachment whose max rpm is
below the shaft rpm.
Read, understand and follow all
warnings and instructions in this
manual and on the unit.
Gloves
should
be
worn
when necessary, e. g., when
assembling cutting equipment.
Always wear eye, head and ear
protectors when using this unit.
Use anti-slip and sturdy
footwear.
Keep all children, bystanders
and helpers 15 m away from
the unit. If anyone approaches
you, stop the engine and cutting
attachment immediately.
Blade thrust may occur when
the spinning blade contacts a
solid object in the critical area.
A dangerous reaction may
occur causing the entire unit and
operator to be thrust violently.
This reaction is called BLADE
THRUST. As a result, the
operator may lose control of the
unit which may cause serious or
fatal injury. Blade thrust is more
likely to occur in areas where it
is di
ffi
cult to see the material to
be cut.
Be careful of thrown objects.
Be careful of the engine.
Engine gets hot by running
engine.
Indicate handle location. Do not
attach handle above this point.
000Book̲CG31EBS̲Tha.indb 5
000Book̲CG31EBS̲Tha.indb 5
2009/06/30 16:29:12
2009/06/30 16:29:12
