HiSUN STRIKE 250 LIFT KIT 2”
At this point you should have the complete kit installed and tightened. Remove off the jack
stands and using your body weight, I would bounce the UTV up and down a few times to
check operation prior to taking out for a first drive. Make sure you have tightened all nuts
and bolts. If you have any questions at this point, please contact me with your problem
right away.
Now, go out and have some fun with more ground clearance available. I have also installed
wheel spacer of 2” on our units. The wheel pattern is the same as the Yamaha Banshee, so
finding a set online is very easy if you want that same look as our units.
Have fun and enjoy your taller Hisun for some more off road adventures.
Matt Tate
Lakewood Ca 90713
562-682-7859
STOCK
2” LIFT
