Hisun HS800UTV, Owner'S Manual

Page: 36 / 175

4-14 Control Functions
To unlock the differential gear in 2WD
Stop the vehicle, make sure the
On-Command four-wheel-drive switch is set
to “2WD”, move the select lever to position
ⓑ
, and then set the switch to “UNLOCK”. the
differential gear is unlocked, the differential
gear lock indicator light will go out.
At this time, with rear differential lock on the
rear bridge unlocked, the rear differential
starts to work.
WARNING
POTENTIAL HAZARD
Riding too fast while the vehicle is in
4WD-LOCK.
WHAT CAN HAPPEN
All wheels turn at the same speed when
the differential is locked, so it takes
more effort to turn the vehicle. The
amount of effort required is greater the
faster you go. You may lose control and
have an accident if you cannot make a
sharp enough turn for the speed you are
traveling.
HOW TO AVOID THE HAZARD
Always ride at a slow speed when the
vehicle is in 4WD-LOCK, and allow extra
time and distance for maneuvers.
Accelerator Pedal
Press the accelerator pedal down to increase
engine speed. Spring pressure returns the
pedal to the rest position when released.
Always check that the accelerator pedal
returns normally before staring the engine.