www.hissmekano.se
Manual Viksam 3.0 version 2
–
October 2022
5
3
Connections
ALL ELECTRICAL CONNECTIONS MUST BE DONE WITH NO POWER.
3.1
Voltage supply
The door control is supplied with a quick-connect IEC C14 cable for the power supply.
This is connected to 230 VAC and earth. A fuse (2.5A slow) is located in the connection housing.
3.2
Motor and encoder connection
The motor is delivered including an encoder with cabling that is connected as shown below.
NOTE. The encoder is connected differently depending on whether it is a right- or left-hanging
door.
