Manual
MH-012 Ecomaster Clima user manual
5/7
If the bus is not equipped with roof-mounted heaters and the interior temperature is less than 12ºC, speed
0 may be selected while the system is heating, the automatic speed will be 0
If speed 0 is selected manually as in the preceding example then, once the interior temperature increases
to 12.5ºC, the system will automatically take on the corresponding speed and will set itself to Automatic.
Changing the flap position
1.3.
The position of the flap can be changed from external air to internal air. When the position is changed, the
system switches to manual mode.
If the key
(1) is pressed, the system automatically recovers the corresponding position.
To alter the flap, press key
(3). Pressing it once will indicate the current position; pressing it again will
change the position.
If the Ecomaster Clima is operating in air-conditioning mode and the interior temperature is 2ºC higher than
that selected (Set), the flaps will switch to Automatic mode and will close.
Activation of ECO.
1.4.
If the
(4) key is pressed, the letters ECO will appear on screen and the compressor will be disconnect-
ed. The system switches into Semi-automatic mode.
Pressing the
(4) key will have no effect if the system is not working in De-humidification mode.
If the
(1)
or
(4)
key is pressed, the ECO option will be switched off.
Activation of De-humidification (Reheat).
1.5.
If the
(6) key is pressed, De-humidification will be activated. This will remain in operation for 15 minutes
or until the
(6)or
(1) key is pressed again.
“Reheat” cannot be activated if there are no heaters installed on the roof unit.
Selecting the de-humidification option cancels out the ECO option.
Check Temperatures
1.6.
The internal and external temperatures can be checked by pressing the
(5) key. The interior tempera-
ture is displayed first, then the exterior temperature when the key is pressed again, and so on in a loop.
