Hisense YXE-C02U, Use And Installation Instructions

Page: 16 / 20

If need to temporarily leave for a few days when weekly timer has been set,at the meanwhile timer
ON/OFF is not permitted to work and continue to work after back,you can hold down“ON/OFF”button
for 3 seconds to turn it off completely. At this moment, weekly timer set time can still save, but air
conditioner will not run.
Weekly timer setting resolution is 1 minute.Timer ON/OFF signal is effective within 1 minute.
13
2
.
Timer on hour blinks
,
press ncrease
to set the desired time.
Each press
“ ”
button
，
time increases 1
；
Each press
“ ”
button
，
time decreases 1
.
After timer ON hour has been set,press “ENTER”button to return to timer
ON minute setting.
If you don't need timer OFF Setting, press the"CANCEL" button to cancel.
Timer
OFF setting is the same step with timer ON setting.
After TIMER ON/OFF setting is completed,press “ ”(increase
）
or
“ ”(decrease
）
to select desired day
，
press “ENTER”button to confirm
it,or press “cancel”button to cancel.The selected day will be marked with
“ ”. For
example
,
shows 7days of a week all selected are
effective.
Continue group 2 setting,repeat the same setting procedure as group1.
Four groups timer on/off can be set at most .
You can quit WEEKLY TIMER setting by pressing“TIMER/CLOCK”
or “ON/OFF” button when group number blinking.
CHECKING THE CURRENT WEEKLY TIMER SETTING
Press
“
TIMER
/
CLOCK
”
button to check WEEKLY TIMER setting
when WEEKLY
TIMER exit.
“ ”(i
）
or “ ”(decrease
）
Timer Groop Select
Timer ON Setting
Timer OFF Setting
Timer Day Select
FUNCTION SET
NOTE
：