Hisense Refrigerator
8
12. Connect electrical connector
①
in
accordance with step 3 and then install
part
②(
which is in the plastic bag).
13.Reverse part
①
by 180°and install it
onto the left corner of the door
，
then
mount part
②.
(both of which are taken
down in step 2)
14. Take the reed switch out of the
coping block(part
③
in step 3)and mount
it on another block for use (which is
with mark “L” in the plastic bag). Put the
coping block just removed back to the
plastic bag.
15.
,
connector
②
, and then install part
③ .
Install
part
①
connect the wire
Note
：
Be
sure
character
side
of
reed switch fits well with coping block.
①
②
③
①
②
upper hinge cover(right)
1
2
1
2
3
9. Screw out the upper hinge axis, turn
the upper hinge over and fix axis on it.
Then place it at side for use.
10. Exchange wires both in the left and
right slots of refrigerator body.
11. Move the door to appropriate
position, adjust part
①
and the door,
Move the connecting wire
②
in the slot
of the door from left to right
，
and then
fix part
①
and wire
②
by screws
③ .
(Please hold the door by hand when
installing)
