Hisense Refrigerator
6
Reversing the door
The side at which the door opens can
be changed, from the left side (as
supplied) to the right side, if the
installation site requires.
Warning!
When reversing the door, the
appliance must not be connected to the
mains. Ensure that the plug is removed
from the mains socket.
Tools you will need:
8mm socket wrench
Cross-shaped screwdriver
8mm wrench
Thin-blade screwdriver
Note:
Before you start lay the
refrigerator on
its
back
in order
to
gain
access
to
the base
,
you
should
rest
it
on
soft
foam packaging
or
similar
material
to
avoid damaging
the
backboard
of
the refrigerator
.
To
reverse
the
door
,
the following
steps
are
generally recommended
.
1. Stand
the
refrigerator
upright
.
2. Open part
①
on top of the
refrigerator body from left side and then
take down part
③
and part
④
on the
door in the same way. Take down part
②
and put it back to the plastic bag.
3. Disconnect electrical connector
①
as
well as electrical connector
②
and then
take down part
③.
4. Remove the screws
① ,
loose
wire
②,
and remove part
③.
1
3
2
③
Upper cover of upper door
②
Upper hinge cover (left)
①
Upper cover
④
Corner
cover
3
2
1
buckle
