water. Commercially available dish
washing detergents may also be used.
After cleaning wipe with fresh water and
clean dish cloth.
Accumulation of dust at the condenser
increases energy consumption, clean the
condenser at the back of the appliance
once a year with a soft brush or a
vacuum cleaner.
Check the water drain hole on the rear
wall of the refrigerator compartment.
Clear a blocked drain hole with the aid of
something like soft green peg, be careful
not to make any damage to the cabinet by
sharp things.
After everything is dry place appliance
back into service.
Defrosting
Why defrosting
Water contained in food or getting into air
inside the fridge be opening doors may
form a frost layer inside. It will weaken the
refrigeration when the frost is thick. While
it is more than 10mm thick, you should
defrost.
Defrosting in fresh food storage
compartment
It is automatically controlled by switching
the temperature regulator on or off so that
there is no need of operation of defrosting.
Water from defrosting will be drained into
an drip tray through a drain pipe at the
back of the fridge automatically.
1
7
Go out of use for a long time
Remove all refrigerated packages.
Switch off the appliance by turning the
temperature regulator to position “0”.
Remove the mains plug or switch off or
disconnect the electricity supply.
Clean thoroughly (see section: Cleaning
and Care)
Leave the door open to avoid the build up
of odors.
Note:
If the appliance contains freezer
compartment
What to do if…
Warning!
Before trouble shooting,
disconnect the power supply. Only a
qualified electrician of competent
person must carry out the trouble shooting
that is not in the manual.
Important!
There are some sounds during
no rma l u s e(c o m pr es s or, r ef r i ge r an t
circulation)
Important!
Repairs to refrigerators/freezers may only
be performed by competent service
engineers. Improper repairs can give rise to
significant hazards for the user. If your
appliance needs repairing, please contact
your specialist dealer or your local Service
Force Center.
Problem
Possible cause
Solution
Appliance does not
work.
Appliance cools too
much.
Appliance is not switched on.
Mains plug is not plugged in or
is loose.
Fuse has blown or is defective.
Socket is defective.
Temperature is set too cold.
Switch on the appliance.
Insert mains plug.
Check fuse, replace if necessary.
Mains malfunctions are to be
corrected by an electrician.
Turn the temperature regulator to
a warmer setting temporarily.
