background image

Problem 

Cause 

Refrigerator can’t 

start 

1.1 Is the power cord connecting well

 

1.2 Is the power voltage too low

 

1.3 Is the ambient temperature too low?     

1.4 Is the circuit on power?     

1.5 Is there some default in compressor 

1.6  Is the refrigeration system blocked by ice or dirty,  please stop the unit and 

restart after 10 minutes to see if the compressor can start. 

Weak cooling effects 

2.1 Is there any heat source around the refrigerator?   

2.2 Is there enough space around the refrigerator for rejection of heat?   

2.3 Is the setting of the temperature appropriate?   

2.4 Is there too much food or overheating food in it? 

2.5 Does the door open frequently?   

2.6 Is the door completely closed?     

2.7 Does the gasket destroyed or distort?   

2.8 Does the gas leak? 

The unit can not stop 

running 

3.1 Is there any heat source around the refrigerator?   

3.2 Is there enough space around the refrigerator for rejection of heat? 

3.3 Is the setting of the temperature appropriate?   

3.4 Is there too much food or overheating food in it? 

3.5 Does the door open frequently? 

3.6 Is the door completely closed? 

3.7 Does the gasket destroyed or distort?   

3.8 Is the thermostat good operation? 

3.9 Does the gas leak? 

Ice up in the freezing 

chamber 

4.1 Is the setting of the temperature appropriate? 

4.2 Is there multi-moisture food and too close to the back wall of the refrigerator?   

4.3 Is the ambient temperature too low?   

4.4 Is the electric parts on good condition, specially the thermostat wich will 

cause the unit non-stopping 

Abnormal noise 

5.1 Is the refrigerator stably placed? 

5.2 Does the refrigerator bump other objects? 

5.3 Whether the internal accessory of the refrigerator is in the right place. 

5.4 Whether the water plate of compressor is fall from the unit. 

5.5 Does the tube of the refrigeration system bump each other? 

5.6 The noise sound likes Water flow inside the refrigerator, in fact,it is normal, 

which is caused both when refrigerator start and shut-down; in addition, 

frost-dissolving  causes this sound, too, which is a normal phenomenon. 

5.7 There will be a cracking sound in the cabinet  ,when the cabinet or cabinet 

accessory contracting or expanding, this sound will be made, which is normal. 

5.8 The motor operation sound in the compressor is appears to be louder at night 

or begin starting. which is a normal phenomenon; also the uneven placing would 

lead to too much running noise.   

There is a peculiar 

smell in the units 

6.1 Is the food with special smell sealed tight? 

6.2 Does it have long time storing food or degenerated food?   

6.3 Whether the internal cabinet needs cleaning. 

the forefront or the 

middle cabinet heats 

7.1 As fridge Anti-condensation tube is placed here and caused the above 

phenomenon, which is normal. 

Summary of Contents for RS-09DC4S Series











Reviews: