15
Hisense Refrigerator
You could fill water into it as steps bellow:
1.Rotate the small lid anticlockwise , then
remove the small lid.
2. Fill water into the water tank through the
hole on the large lid with a kettle or any kind of
other containers.
Filling water
1
2
Warning!
Don't touch other parts of the appliance when filling
water, it may cause the water leakage.
Caution!
Fill with water up to 3.0L (which is
suggested), and not above the level.
Otherwise, it may overflow even when the
is close.
Before you fill the drinking water into the
water tank, ensure that the water tank is
steady and in a correct position.
Otherbeverage
(
milk
,
juice
,
carbonated
beverage
etc
)
is
not suggestted to be used
than
potable
water
.
Especially
beverage
including
grain
must
not be
used
(
may
result
in
failure
).
Hot water can not be filled into the water tank
directly.
cap
cover
●
●
●
●
●
●
●
Be careful not to press on the valve.
When
you
assemble
water
tank
on
the
door
,
be careful
to
install
certainly as the
valve should be inserted into the hole first
.
The removal is the reverse of assembly.
Warning!
The lock is defined as “child lock”.
Don't push the dispenser lever forward strongly,
when the dispenser is on “LOCK” situation, it
may damage the mechanism.
1. Put the water tank out of the door carefully,
and then wash the tank,cap cover,cover
bucket, and the valve lightly in water.
2. After you have successfully cleaned the
appliance, you should dry it by natural drying
or using the dryer.
3.You should clean the receiving tank with dry
towel regularly to avoild overflowing.
Cleaning
Before you dispense the water, make sure the
lock device is on “UNLOCK” situation.
Unlock
Dispenser lever
Suggested position
You should use the correct cups to receive
water underneath the water dispenser.
Receiving Water
