Turn on/off
1. Connect the TV power line to AC outlet.
2. Press the Power button on the TV set. When the TV is on, press the Power button on the
remote control, and the TV will enter Standby state. Press this button again, and you can
watch TV normally.
3. Press the Power button again to turn off the TV.
Note:
u
In order to save power consumption,
if you do not watch TV for a
short time, if you do not watch TV for a very long time, shut down the main power of the TV.
u
If the TV is turned off , to turn it on agin, please wait at least 5 seconds in case the abnormal
phenomena occurred.
Changing Channels/ Volume
1. Press CH+/- button on the remote control, you can change the channels.
(Press VOL
button to raise or lower the volume).
2. Press CH
button on the front panel of the TV set, you can also change the channels.
(Press VOL
button to raise or lower the volume).
3. Press the numeric buttons on the remote control to display the corresponding channels.
Note:
Changing the channels can also be achieved by directly pressing the Program No. If you want to
choose the program No. from 1 to 9, press the numeric buttons directly. If you want to select a
program No. from 10 to 200, the time spent between twice pressing the numbers mustn't be
more than 3 seconds.
set the TV in Standby state
+/-
+/-
+/-
Basic operation
11
