Change the batteries
1. Open the battery cover on the back of the remote control.
2. Install two AAA size (1.5V) batteries. Match the “+” and “-” signs on the batteries to the signs
on the battery compartment.
3. Close the battery cover.
Note:
1. If the remote control doesn't work normally, unstable, or cannot control the TV, please replace
the batteries.
2. If you do not use the remote control for a long time, remove the batteries.
The effective range of remote control
1. The remote control distance: 8 meters in front of the TV set.
2. The remote control angle: taking the television infrared light receiver window as an apex, 6
meters away, its controlled angle (left to right) is within 30 degrees, while the vertical angle
(up to down)is within 30 degrees.
Mode Picture feature
Standard Normal picture
Bright Bright and fresh picture
Soft Mild picture
User The picture feature you set
Picture Mode
Brief operation of the remote control
9
Mode
Sound feature
Music
Various music
mode
Standard
Standard music
Speech
Enhance the dialogue effect
User
The sound feature you set
Sound Mode
1.
Source:
Choose the current input signal of the main
picture. First press this button to display the signal
inputs: TV, AV1, AV2, Component, HDMI (or
HDMI2,) VGA, Hi-DMP.
then press
VOL OK button to confirm.
2.
Picture:
It can be set as Standard, Bright, soft and
User. This mode achieves a certain image display
effect by setting the brightness, contrast and color
etc.
3.
Sound :
It can be set as Music, Standard, Speech
and User. This mode achieves a special sound effect
by setting equalizer.
4.
Still:
Press this button the moving picture become a
still one.
5.
Mute:
Press Mute button to turn the sound off, press
this button again to turn the sound back on. This
function is used to switch off sound temporarily.
HDMI1,
Press CH+/- button to
select the source you wanted to enter,
+/
Main
AV1
AV2
Component
HDMI
VGA
Hi-DMP
TV
: Select
OK : Enter
Quick function operation of the remote control
