15
IMPORTANT INFORMATION ABOUT THE REMOTE AND
BATTERIES
•
Discard batteries in a designated disposal area. Do not
throw them into a fire.
•
Remove old batteries immediately to prevent them from
leaking into the battery compartment.
•
If you do not intend to use the remote control for a long time,
then remove the batteries.
•
Battery chemicals can cause a rash. If the batteries leak,
clean the battery compartment with a cloth. If chemicals
touch your skin then wash it immediately.
•
Do not mix old and new batteries.
•
Do not mix alkaline, standard (carbon-zinc) or rechargeable
(NiCd, NiMH, etc.) batteries.
•
Do not continue using the remote if it gets warm or hot.
•
Call our Support Center immediately on the support website.
REMOTE CONTROL RANGE INFORMATION
•
The remote control can work at a distance of up to 26 feet in
front of the TV set. (This distance is used by infrared means
in an unpaired state
.
)
•
It can work at a 30 degree horizontal or vertical angle. (This
angle is used by infrared means in an unpaired state.)
1. Press the switch and the battery case
will pop up automatically.
2. Insert two AAA size batteries. Make
sure to match the (+) and ( - ) ends of
the batteries with the (+) and ( - ) ends
indicated in the battery compartment.
3. Push the battery case back to the
remote control.
1. Slide the back cover to open the battery
compartment of the remote control.
2. Insert two AAA size batteries. Make
sure to match the (+) and ( - ) ends of
the batteries with the (+) and ( - ) ends
indicated in the battery compartment.
3. Close the battery compartment with the
cover.
Summary of Contents for Laser Cinema 120
Page 31: ...24 ...
