Hisense KF-2302GWE, Instruction & Installation Manual

Page: 9 / 43

C
SET TEMP
1HOUR
HOUR
ON
OFF
TEMP ON/OFF 1HR
HIGH
POWER
FLAP MODE
FAN SPEED
SLEEP
ON
OFF
SET CANCEL
BATTERY
A/C SENSOR
ACL
Composition of the Air Conditioner
4. Introduction of the Remote Control Unit
6
SENSOR
Transmitter
Display
1 HR. TIMER button
HIGH POWER button
FLAP button
TIMER ON/OFF button
TIMER SET/CANCEL button
A/C SENSOR button
TEMP. setting button
ON/OFF button
MODE selector button
FAN SPEED selector button
NIGHT SETBACK button
ACL button
Battery compartment(Pull off the cover to
expose the batteries.)
NOTE
The illustration above pictures the remote control unit after the cover has been lowered
and removed.
When you press the buttons on the remote control unit, the mark
a p p e a r s
i n
the display to transmit the setting changes to the receiver in the air
c
o n d i t i o n e r .
A temperature sensor inside the remote control unit senses the room
temperature.
Information on the operating conditions is displayed while the remote
control unit is switched on. If the unit is turned off, only the mode that
was set previously is still displayed.
For details, see "Night Setback Mode". When you press this button, in the
DRY or COOL mode, the mark appears in the display, the remote
control unit will automatically adjust the set temperature to save energy.
Press the button to increase the set temperature.
Press the button to reduce the set temperature.
Transmitter
SENSOR
Display
SLEEP button
TEMP. setting buttons
ON/OFF operation button
(Cover closed)