Screen
0
0
0
0
Image Position
H Size
V Size
Phase
Clock
Auto Sync
: Move OK/ : Enter EXIT/MENU: Exit
Analog TV
Digital TV
Video
S-Video
Component
PC
HDMI1
HDMI2
HDMI3
On
On
Off
On
Off
:Move : Change MENU: Back EXIT: Exit All
Initial Program
Basic Setting
Last
Off
:Move : Change MENU: Back EXIT: Exit All
Hotel Lock
Min Volume
Max Volume
Panel Button Lock
Submenu Lock
Input Selection
Initial Setting
On
0
100
Off
Off
:Move : Change MENU: Back EXIT: Exit All
Lock Settings
Lock Settings
Lock Settings
Lock Settings
Screen Settings
Hotel Lock
[Menu, Lock Settings, Hotel Lock]
-An option to secure major settings in place.(Used for commercial purpose only)
If you set the Hotel Lock “On”, you can change some of its options to control some of the
functions, and the password protection is being activated, Most of OSD functions are locked
except inputting password.
1,Min Volume and Max control : You can set their volume from 1 to 100.
2,Panel Button Lock: Locks the TV panel buttons except [POWER] button.
3,Submenu Lock: Locks OSD operation except Picture and Lock Settings.
4,Input selection : Input selection (Analog TV, Digital TV, PC...)which are set
“On” can be used in Source OSD, Input selection (Analog TV, Digital TV, PC...)which are
set “Off” cannot be selected on the Source OSD.
5,Initial Setting: If the Initial program is set to “Last”, the Basic Setting set to “On”,when
switching the TV on it revert back to the last viewed source including the channel station
last viewed, the picture mode and the sound mode will be set Standard mode, the volume
value will be initial set at 30%.
Child Lock
[Menu, Lock Settings, Child Lock]
If Child Lock is set to “on” , most of the remote and the panel buttons are invalid except
[POWER],[VOL ] , [VOL ] , and the [MENU] buttons on the front side panel and
[POWER],[V+] , [V-] , [OK] , [MENU] and [NUMBER] buttons on the remote control. Press
[MENU] to display the main menu, only Lock Settings can be selected and adjusted by
entering your password, the [NUMBER] buttons are used for entering a password.
NOTE:
The factory initial password is “1111”.
PC Setting
PC software setting: Set the PC Software properly
Supported VGA Mode:
VGA SVGA XGA SXGA
Please note: Your PC/Notebook may not be able to display some of these resolutions.
Take Windows XP as an example, and the Windows system display setting is as
illustrated:
1,Right click anywhere on your display, select 'Properties'.
2,Find the Settings tab on the dialogue box, set the screen Resolution.
3,See above details about the resolutions supported by this unit
.
4,Click OK to exit.
PC Screen Settings
Image Position: Adjust the VGA image position single unit mode.
H Size: Adjust the horizontal size of the image.
V Size: Adjust the vertical size of the image.
Phase: Adjust the VGA phase to match the PC.
Clock: Adjust the VGA Clock to match the PC clock.
Auto Sync: Auto adjust the VGA image position.
23
On
On
On
On
Lock Settings
Parental Guidance
Hotel Lock
Child Lock
Change Password
Block None
Off
Off
:Move OK/ : Enter MENU/EXIT: Exit