Installing in television channels
Your television has been pre-adjusted to receive the five major TV networks available (only available in analogue TV mode)
in capital cities of Australia; however you can add or delete channels at any time using the functions under the Channel
submenu.
[Menu, Channel, Auto Install]
-
In both
the
Analog and Digital signal source
1.Press [Menu]
to display the main OSD options.
2.
Select the Channel option by using [P+/-], press the [OK/V+] button to enter
the
Channel OSD.
3.Press the [P+/-] button to select
the
Auto Install.
4.Press the [OK/V+] button to
start an automatic search and this will memorize all the
available channels. Auto Install will take a few minutes; please wait until it
has finished.
Manual Install
[Menu, Channel, Manual Install]
-in Analog signal source
Manual Install is only needed when analogue channels are not found under an automatic tune.
1.Press [Menu]
to display the main OSD.
2.Press [P+/-] to select the
Channel
option,
press the [OK/V+]
button to enter
the
Channel
OSD
.
3.Press the [P+/-] button to select Manual Install, and press the [OK/V+]
button to enter Manual Install menu.
4.Press the [P+/-] button to select Channel No., and use [V+/-] to
set
the
Manual Install initial Channel No..
5.Press the [P+/-] button to select Channel No., use
the
[V+/-]
button to set
the
Manual Install initial Channel No./Direction, then press [OK]
to install channels from the initial channel No. along this initial direction.
6.
If you would like to edit your installed analogue channel name, press
[P+/-] to select
Channel Name,
then select a number (0_9) or press repeatedly to select a letter.
e.g.
1 (A, B, C)
2 (D, E, F)
pressing '1' 3 times will display the letter C. press [V+] to move to the next letter space and repeat until the desired channel
name is displayed.
7.Press
[P+/-] to select Save and press [OK] button to confirm. Press [EXIT] to exit all menus.
Manual Install
[Menu, Channel Manual Install]
-in Digital signal source
1.Press [Menu] to display the main OSD options.
2.Press [P+/-] to select the Channel option,
press the [OK/V+] button to enter
the
Channel OSD
. .
3.Press the [P+/-] button to select Manual Install, press the [OK/V+] button to enter
the
Manual Install menu.
4.Press the [P+/-] button to select Channel No.,use [V+/-] button to set
the
Manual Install initial Channel No..
then press [P+/-] button to select scan item, press
the
[OK] button to begin scan from
the
initial Channel No..
Auto Install
This is the easiest and most effective way to install all channels available in your area
automatically.
Auto install in progress
EXIT: Cancel Auto Install
Channel
Manual Install
Auto Install
Fine Tune
Program Edit
: Move OK/ : Enter EXIT/MENU: Exit
Auto Install
Analog Channels: Searching channel frequency: 487.288
Total channels found: 4
Channel
:
: Back
: Exit All
Move : Change
MENU
EXIT
Analog Channel Manual Install
Channel No.
Direction
Channel Name
Band
Air
2
UP
Save
Channel
:
: Back
: Exit All
Move : Change
MENU
EXIT
Digital Channel Manual Install
Channel No.
12
Scan
17