Hisense HS211 User Manual Download Page 4

4

EN

Caution:

-   Use of controls or adjustments or performance 

of procedures other than those described 

herein, may result in hazardous radiation 

exposure or other unsafe operation.

-   To reduce the risk of fire or electric shock, do 

not expose this apparatus to rain or moisture. 

The apparatus must not be exposed to 

dripping or splashing and objects filled with 

liquids, such as vases, must not be placed on 

apparatus.

-   The mains plug/appliance coupler is used as 

the disconnect device, the disconnect device 

must remain readily operable.

-   Danger of explosion if battery is incorrectly 

replaced. Replace only with the same or 

equivalent type.

Warning

•   The battery (batteries or battery pack) shall not 

be exposed to excessive heat such as sunshine, 

fire or the like.

•   Before operating this system, check the 

voltage of this system to see if it is identical to 

the voltage of your local power supply.

•   Do not place this unit close to strong magnetic 

fields.

•   Do not place this unit on the amplifier or 

receiver.

•   Do not place this unit close to damp areas 

as the moisture will affect the life of the laser 

head.

•   If any solid object or liquid falls into the 

system, unplug the system and have it checked 

by qualified personnel before operating it any 

further.

•   Do not attempt to clean the unit with chemical 

solvents as this may damage the finish. Use a 

clean, dry or slightly damp cloth.

•   When removing the power plug from the wall 

outlet, always pull directly on the plug, never 

yank on the cord.

•   Changes or modifications to this unit not 

expressly approved by the party responsible 

for compliance will void the user’s authority to 

operate the equipment.

•   The rating label is pasted on the bottom or 

back of the equipment.

 

This equipment complies with FCC radiation 

exposure limits set forth for an uncontrolled 

environment. This equipment should be installed 

and operated with minimum distance 20cm 

between the radiator & your body.

DO NOT INGEST BATTERY,CHEMICAL 

BURN HAZARD

  The remote control supplied with this product 

contains a coin/button cell battery. If the coin/

button cell battery is swallowed, it can cause 

severe internal burns in just 2 hours and lead 

to death. Keep new and used batteries away 

from children. If the battery compartment 

does not close securely, stop using the product 

and keep it away from children. If you think 

batteries might have been swallowed or placed 

inside any part of the body, seek immediate 

medical attention.

Correct Disposal of this product. This 
marking indicates that this product 

should not be disposed with other 

household wastes throughout the EU. 

To prevent possible harm to the 

environment or human health from 

uncontrolled waste disposal, recycle it 

responsibly to promote the sustainable reuse 

of material resources. To return your used 

device, please use the return and collection 

systems or contact the retailer where the 

product was purchased. They can take this 

product for environmental safe recycling.

We hereby declares that this 

product is in compliance with the 

essential requirements and other 

relevant provisions of Directive 

2014/53/EU.

The Bluetooth® word mark and logos are 

registered trademarks owned by Bluetooth SIG, 

Inc. We are the licensee to use such marks. Other 

trademarks and trade names are those of their 

respective owners.

M anufac tured under license from D olby 

Laboratories. Dolby and the double-D symbol are 

trademarks of Dolby Laboratories.

Summary of Contents for HS211

















Reviews: