12
EN
Basic Operation
Standby/ON
When you first connect the main unit to the mains socket, the main unit will be in Standby mode.
- Press the button on the unit or on the remote control to switch the unit ON.
- Press and hold the button on the unit or press button on the remote control again to switch the
unit back to STANDBY mode. The POWER indicator will light up red.
- Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely.
- If the unit is idle for over 15 minutes, the unit will automatically switch to Standby mode.
Select Modes
Press the button on the unit repeatedly or or the
, ,
HDMI ARC
buttons on the remote control to
select the
AUX
,
OPTICAL
,
COAXIAL, HDMI ARC, USB
and
BT
(Bluetooth) mode.
• Red: In STANDBY mode.
• Green: In AUX mode.
• Blue: In Bluetooth mode.
• Orange/Orange flash: In Optical/Coaxial mode.
• White/White flash: In HDMI ARC/USB mode.
Adjust the Volume
- Press the
VOL+ / VOL-
buttons on the unit or on the remote control to adjust the volume.
- If you wish to turn the sound off, press the (
MUTE)
button on the remote control. Press the MUTE
button again or press the
VOL+ / VOL-
buttons on the unit or on the remote control to resume
normal listening.
- While adjusting the volume, the status indicator flashes quickly.
- While the volume level reaches its maximum level, if you press the
VOL+
button again, the status
indicator flashes once. While the volume level reaches its minimum level, if you press the
VOL-
button
again, the status indicator flashes once.
Select a Preset Sound Effect
While playing, press the
NEWS
or
MOVIE
or
MUSIC
buttons on the remote control to select between
preset equalizers:
Movie
(recommended for viewing movies),
Music
(recommended for listening to
music),
NEWS
(recommended for listening to NEWS).
AUX / HDMI ARC / COAXIAL / OPTICAL Operation
1 Ensure that the unit is connected to the TV or audio device.
2 Press the button on the unit repeatedly or the
/ HDMI ARC
buttons on the remote control to
select the
HDMI ARC, COAXIAL, OPTICAL, AUX
mode.
3 Operate your audio device directly for playback features.
4 Press the
VOL +/–
button to adjust the volume to your desired level.
Tip:
While in
HDMI ARC, COAXIAL, OPTICAL
mode, if there’s no sound output from the unit and the
status indicator flashes quickly, you may need to activate
PCM
or
Dolby Digital
Signal output on your
source device (eg. TV, DVD or Blu-ray player).
