6
Installing the Battery
You must install and charge the battery to use your
phone. Insert the ridge at the side of the battery into the
base of the phone, then push the battery down and snap
it into place.
Note:
Your phone is designed to be used only with Original
batteries and chargers. Use of other batteries or charger
may cause damage to your phone and void the warranty.
Charging the Battery
New batteries are shipped partially charged. Before you
can use your phone, you need to charge the battery, as
indicated by the following instructions. Some batteries
perform best after several full charge/discharge cycles.
1.
Connect charging line and changing bace . Plug
the charger into your phone’s connector port with
the arrow facing up.
2.
Plug the other end of the charger into the
appropriate electrical outlet (100~230VAC). The
phone’s status lamp will light red during charge.