Hisense HL65K560PZLN3D, User Manual, Page: 29 / 44

to a network that supports DHCP. To set up your TV’s cable
network connection automatically, follow these steps:
How to set up automatically
1. Connect your TV to your LAN as described in the previous
section.
2. Turn on your TV, operate according to the description in
the Settings menu until the Network screen appears.
3. On the Network screen, select Configuration and press
[OK] button to enter the submenu.
4. Set Internet Connection to On and Interface to Ethernet.
5. Select IP Setting and press [OK] to enter it.
6. Set Address Type to Auto.
7. Auto acquires and enters the needed internet values
automatically.
8. If the connection values are not automatically entered,
please check your modem and router manuals for
directions to enable automatic IP addressing by DHCP.
Or, follow the steps listed to the follow to manually
configure the network connection.
Use the Automatic Network Setup when connecting your TV
Advanced Features
Network Setup (Auto)
Network Setup (Manual)
1. Follow Steps 1 through 5 in the “How to set up
automatically” procedure.
2. Set Address Type to Manual.
3. Press [
▲
/
▼]
to select IP Address and press [◄/►] to
move the cursor to the entry field. Then press [0~9]
buttons to enter the numbers.
4. Press [
▲
/
▼]
to select the next options to enter the
numbers.
5. When done, press [MENU] to return to the pr evious
menu.
6. Select Connection Test to check the internet
connectivity.
Use the Automatic Network Setup when connecting your
TV to a network that requires a Static IP address.
Getting the Network Connection Values
To get the network connection values on most windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
screen
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support tab, click the Details button. The
network connection values are displayed.
How to set up manually
To set up your Tv’s cable network connection manually,
follow these steps:
29
Address Type
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Auto
176. 16. 0. 0
255. 255. 255. 255
172. 16. 0. 0
172. 16. 2. 2
0. 0. 0. 0
Settings
Select Back
MENU
Address Type
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS Manual
176. 16. 0. 0
255. 255. 255. 255
172. 16. 0. 0
172. 16. 2. 2
0. 0. 0. 0
Settings
Select Back
MENU
Input
0~9