Hisense HL65K560PZLN3D, User Manual, Page: 17 / 44

Turning the TV On for the First Time
1.
completed all the connections.
2. Switch on the POWER ON/OFF at the bottom of the TV.
Then the TV switches to on mode.
Connect the mains cable to the mains socket after you have
To mains socket
17
Always disconnect the TV from the mains socket when not
in use for a long period of time.To completely disconnect the
mains power, please remove the mains plug from the mains
socket or switch off the POWER ON/OFF switch.
Basic Features
3. The first time you turn the TV on, it will go straight into the
Setup Wizard -1 menu.
4. Press [
▲
/
▼]
buttons to select the language and press [OK]
to confirm.
Then press [►] button to enter the Setup Wizard -2 menu.
Or you can press [EXIT] button to exit the wizard.
5. Press [
▲
/
▼]
buttons to select your country and press [OK]
to confirm.
Then press [►] button to enter the Setup Wizard -3 menu.
Or you can press [EXIT] button to exit the wizard.
6. Press [
▲
/
▼]
buttons to select the local time zone where
you operate the TV and press [OK] to confirm.
Then press [►] button to enter the Setup Wizard -4 menu.
Or you can press [EXIT] button to exit the wizard.
7. Press [
▲
/
▼]
buttons to select your mode and press [OK]
to confirm.
All available TV channels are stored
.
This display shows the
progress of the tuning and the number of channels found
.
You can press [◄] button to return to the last wizard.
If you want to cancel the scan , please press
button.
9. After scan, the wizard will display congratulations and then
you can press
button to exit the wizard.
8. Press [
▲
/
▼]
buttons to select Scan and press [►] button
to enter the next wizard and the TV start to search the
programs automatically
.
[EXIT]
[OK]
Select Exit
EXIT
Next
Setup Wizard -3
VIC
QLD
SA
WA
TAS
NT
NSW/ACT
Please set the local time zone for your TV set:
Back
Select Exit EXIT Next
Setup Wizard -5
Scan
Skip Scan
Back
Channel Installation
Cancel
EXIT
Setup Wizard -6
Channel Installation
Status: Scanning...
ATV Program Installed: 4
DTV Program Installed: 3
Cancel
EXIT
Setup Wizard -7
Congratulations!!
Completed Initial Setup.
Please press [OK] to exit the wizard.
Back
NOTE