16
■
Turning your TV on and off
To turn your TV on: Connect the TV to an AC power outlet and an external antenna, then turn on the power via
switch located below the front right hand side of unit. The power indicator will initially be red and then will change to
blue. A few seconds later an image will appear on the screen. Setup wizard-select your state and press OK to start
auto tuning process.
●
Turning off to standby mode: Press [Power Standby ] on the front panel or on the remote control to switch to
standby mode. You can activate the unit again by pressing [Power Standby ].
Power indicator: Red indicates standby mode. Blue shows that the unit is on. There will be no light when the power
switch is in the off position.
Notes:
Turn the power switch off when you do not intend to use the TV for long periods, for example overnight. Remove
the connection from the wall power outlet if you do not intend to use the unit for longer periods, for example if you
plan to be away a few days. Wait at least 5 seconds after turning off if you want to re-start the TV.
■
Selecting the video source
●
Selecting the video source depending on the video device you have connected to your TV, you can select
Analog TV, Digital TV,Video1,Video2, SVideo,Component1,Component2, PC , HDMI1, HDMI2 and HDMI3 as
the video source.
●
To select the video source:
Press [Source] . When the list of video sources appears, press [
▲
/
▼
] to select the source, then Press [OK] to
enter.
[D/A] button: press the [D/A] button to switch between the Digital/Analog TV signal input.
■
Adjusting the volume
●
To adjust the volume:
Press [VOL+/VOL- ] to increase or decrease the volume. Press [Mute] to turn the sound off. Press [Mute]
again to turn the sound back on.
■
Changing channels
●
To change channels:
Press [CH+/CH-] to go to the next higher or lower channel. Or, Press the number buttons to select a channel.
For example, to select channel 12, press 1, then 2. Or, press [LAST] to go to the last viewed channel.
■
Selecting the sound mode
●
To select the sound mode:
Press the [Sound] button to select between 4 different pre-adjusted sound modes:
User(configurable mode), Standard, Music, Voice. The User mode preserves your preferred sound settings
after using the Equalizer available under the AUDIO submenu.
Using the Remote Control
Quick starts
