background image

Greasing the Gas Valves

Over time, the gas valves may stick or become difficult to turn. If this is the case, the must be 
cleaned on the inside and the regressed.

N.B.:This procedure must be performed by a technician authorized by the manufacturer.

ADVICE FOR INSTALLATION

The appliance should be installed, regulated and adapted to function with other types of 
gas by a QUALIFIED GAS INSTALLER.

Failure to comply with this condition will render the guarantee invalid.

The appliance must be installed in compliance with regulations in force in your country 
and in observation of the manufacturer’s

instructions.

Always unplug the appliance before carrying out any maintenance operations or repairs.

Some appliances are supplied with a protective film on steel and aluminum parts. This 
film must be removed before using the cooker.

The walls of the units must not be higher than work top and must be capable of resisting 
temperatures of 75°C above temperature.

Do not install the appliance near inflammable materials (eg.curtains).

IMPORTANT:



INSTALLATION of BUILT-IN COOK TOPS

These tops are designed to be embedded into kitchen fixtures measuring 600 mm in depth.

5

Summary of Contents for HHU60GASS


















Reviews: