Hisense H6500TS, User'S Operation Manual

Page: 13 / 16

Unusual noises.
The compressor does
not start immediately
after changing the
temperature setting.
Door seal is not air-tight
(possibly after reversing the
door).
Appliance is not level.
The appliance is touching the
wall or other objects.
A component, e.g. a pipe, on
the rear of the appliance is
touching another part of the
appliance or the wall.
This is normal, no error has
occurred.
Carefully warm the leaking
sections of the door seal with a
hair dryer (on a cool setting). At
the same time, shape the warmed
door seal by hand so that it sits
correctly.
Readjust the feet.
Move the appliance slightly.
If necessary, carefully bend the
component out of the way.
The compressor starts after a
period of time.
Heavy build-up of
frost, possibly also on
the door seal.
Interior lighting does
not work.
The appliance is near a heat
source.
Light bulb is defective.
Please the “Installation
location” section.
refer to
Please look in the “changing the
Light Bulb “section.
The food is too warm.
Temperature is not properly
adjusted.
Door was open for an
extended period.
A large quantity of warm food
was placed in the appliance
within the last 24 hours.
Please the “Initial Start Up”
section.
refer to
Open the door only as long as
necessary.
Turn the
to a colder setting temporarily.
control panel
Appliance cools too
much.
Temperature is set too cold.
Turn the temperature regulator to
a warmer setting temporarily.
12
Hisense Refrigerator