Hisense GG722B, User And Installation Manual

Page: 9 / 12

6
Operation and Use
1.Correctly install D size batteries according to the polarity indicated on the battery box;
2.Turn on the gas supply switch;
3.Press the knob of the stove and rotate it counterclockwise by 90° to the big fire position. At this
time, you will hear continuous discharge and ignition sound of “crackling”. When the flame is
ignited, keep pressing the knob for a few seconds (5-8s) before releasing it. The stove will burn
normally;
4.Rotate the knob in different directions to regulate the fire from the maximum fire to the
minimum fire;
5.Rotate the knob clockwise to the “ ” position until you hear a “click” sound. At this time, the
gas supply is cut off and the flame goes out.
Ignition, switch off, fire regulation
Ignition
Switch off
Regulation
Turn on the gas supply, press the knob of the stove and rotate it counterclockwise.
Rotate the knob clockwise back to the “ ” position to cut off the gas supply.
Refer to the figure above for fire regulation.
Note: The product is equipped with flameout protection device. In the case of unexpected
flameout due to wind blowing or soup overflow during use, the flameout protection device
can automatically cut off the gas supply and ensure the safety.
Off
Medium and small fire
Maximum fire
Medium and big fire
Medium fire Small fire
Minimum fire