4
Getting Started
Installing a Wall-Mount Bracket
4. Carefully place your TV on a soft, cushioned, surface to
prevent damage to the screen.
Secure the stand to the TV with the 4 screws (M5×12mm)
provided. See Figure 4.
4
Screw (M5×12mm)
If you want to attach the TV to a Wall-Mount bracket (not provided), you should first remove the stand if it is pre-attached (see
Step 1).
1. Make sure the TV is laid face-down on a clean, safe,
and cushioned space, remove the original screws in the
bracket holes on the TV back over.
3. Follow instructions provided with the Wall-Mount bracket.
If you are not sure of your ability to do complete the installation, contact a professional installer or service technician for
assistance. The manufacturer is not responsible for any damages or injuries that occur due to mishandling or incorrect
assembly.
The selected screws are 9.5 ~ 11.5 mm in length when measured from the attaching surface of the TV's rear cover. The
diameter and length of the screws differ depending on the Wall-Mount Bracket model.
2. Place the provided spacers in the corresponding bracket
holes. Attach purchased bracket (1.5~2.5 mm thickness)
on the TV with 4 screws provided. Follow instructions
provided with the wall bracket.
1
WARNING
Use only the 4 screws (M6 x 45mm) provided with the TV to prevent internal damage to the TV set or cause it to fall.
Wall-Mount Bracket
9.5 ~ 11.5 mm
Screw
Spacer
the TV's rear cover
Wall-Mount hole pattern VESA (mm)
400 × 400
Wall-Mount screw size (mm)
M6
Screw
(M6x45mm)
2
Spacer × 4
Bracket
(1.5~2.5mm)
Summary of Contents for 50K610GW
Page 2: ...50K610GW 55K610GW ES G124911 ...
Page 4: ...II ...
