Installation Instructions
12
RL19.5A User Manual, 99175B, September 2021
Step 3: Install into Rack
Once you have completed the full bench-test configuration and confirmed that all components are
working properly, you are ready to install the monitor into the rack.
Hope Industrial Systems' Rack Mount monitors conform to the Electronic Industries Association
standard EIA-310-D. Our monitors will fit in type A, B, and C racks with a width of 482.6 mm (19")
(preferred EIA rack width)�
WARNING!
Hope Industrial Systems will not assume liability for damage to internal electronics
due to improper installation� Contact Hope Industrial Systems if you need additional
assistance�
!
The HIS-RL19.5 has a panel height of 7U (shown below).
7U Height
310.7 mm
(12.23")
6.5 mm (0.26")
298.5 mm
(11.75")
437.39 mm
(17.22")
241.3 mm
(9.50")
