Hirschmann OpEdge-8D, User Manual, Page: 23 / 44

Installation OpEdge-8D
Release 01 10/2022
23
2 Installation
The devices have been developed for practical application in a harsh
industrial environment.
On delivery, the device is ready for operation.
Perform the following work steps to install and configure the device:

Checking the package contents
 Installing and grounding the device
 Installing an SFP transceiver (optional)
 Connecting the terminal blocks

Operating the device

Connecting data cables
 Filling out the inscription label
2.1 Checking the package contents

Check whether the package includes all items named in the section
“Scope of delivery” on page 40 .

Check the individual parts for transport damage.
2.2 Installing and grounding the device
2.2.1 Installing the device onto the DIN rail
Note: Verify that there is at least 10 cm (4 in) of space above and below the
device.
WARNING
FIRE HAZARD
Install the device in a fire enclosure according to IEC/EN 62368-1 or
IEC 60950-1 if you are connecting it to a power supply >100 W (PS3) or
>NEC Class 2.
Failure to follow these instructions can result in death, serious injury,
or equipment damage.