manualshive.com logo in svg

Hirschmann OpEdge-8D, User Manual, Page: 11 / 44

Share
Download
Hirschmann OpEdge-8D User Manual Download Page 11

Installation OpEdge-8D

Release 01 10/2022

11

UKCA marking

The labeled devices comply with the following UK regulations: 

S.I. 2012 No. 3032

Restriction of the Use of Certain Hazardous Substances in Electrical 
and Electronical Equipment Regulations

S.I. 2016 No. 1091

Electromagnetic Compatibility Regulations 2016

 

The UKCA conformity declaration will be available to the relevant 
authorities at the following address:

Belden UK Ltd.
1 The Technology Centre, Station Road
Framlingham, IP13 9EZ, United Kingdom
 
You find the UKCA conformity declaration as PDF file for downloading on 
the Internet at: 

https://www.doc.hirschmann.com/certificates.html

 
The product can be used in the industrial sector.

Interference immunity: EN 61000-6-2

Emitted interference: EN 55032

Reliability: IEC/EN 62368-1

You find more information on technical standards here:

See “Technical data” on page 34.

 
The assembly guidelines provided in these instructions must be strictly 
adhered to in order to observe the EMC threshold values.
 

Warning!

 This is a class A device. This device can cause interference in 

living areas, and in this case the operator may be required to take 
appropriate measures.

LED or laser components

LED or LASER components according to IEC 60825-1 (2014):
CLASS 1 LASER PRODUCT
CLASS 1 LED PRODUCT

Summary of Contents for OpEdge-8D













































Reviews:

No comments