Part No. 4801-2994 Rev 10-05
FEED MANAGER
Page 11 of 22
P42 – Controller Setup
This is not settable by the user. It is a unique number that allows the network software (Farm Manager) to
recognize the type of controller.
6.4
PS1 – PS9 Sensor Readings
The Feed Manager will accommodate up to four Feed Level Sensors. The sensor reading will display for
PSx
where
x
is the sensor number. This is a precise reading used mainly for troubleshooting purposes.
NOTE:
As the feed level decreases, the sensor reading number will increase (Range = 0 thru 255).
PS1 – Feed Sensor 1
This is the sensor reading for Feed Sensor 1.
PS2 – Feed Sensor 2
This is the sensor reading for Feed Sensor 2.
PS3 – Feed Sensor 3
This is the sensor reading for Feed Sensor 3.
PS4 – Feed Sensor 4
This is the sensor reading for Feed Sensor 4.
7. Feed Manager Control / Editor Section
The Feed Manager Control / Editor Section includes five Mode Indicator LED’s, a Main Display, Mode Select
button, and Plus and Minus editor buttons.
When a specific feed bin is selected, the Feed Level Indicators for the specific bin will flash and the other
remaining feed bin level indicators will be OFF. After approximately 20 seconds of inactivity, the controller
will exit the Control / Editor mode and return to display all active feed bins. The following functions can be
scrolled-thru by using the Mode Select Button or by first pressing the specific Bin Selection Button (1, 2, 3, or
4).
Function Modes
Mode Indicators
Minus button
(Use to decrease
value of variable)
Plus button
(Use to increase
value of variable)
Mode Select Button
Main Display
1 2 3 4
