background image

 

Part No. 4801-5369 Rev. 10-07 

Chimney Vent 

Page 3 of 12 

2.

 

Specifications and Description 

 
The Hired Hand Chimney Vent is a natural ventilation accessory 
for mounting in the ceiling of animal confinement buildings or 
similar facilities.  Air flow is adjustable by means of a movable 
baffle.  The fully open position allows the entire vent area (see 
below) to provide vertical air flow from the inside to the outside of 
the building.  An extension kit is available to provide an additional 
4 foot of chamber length.  To close the vent when not in use, a 
Winter Door accessory is available.  Finally, for mounting the vent 
in the building roof, a Flashing kit is available. 
 
The Hired Hand Chimney Vent is available in three sizes: 

 

24" x 4' tall    

Vent Area=4 sq. ft. (0.37 sq. m.) 

Part Number 6609-9050 

 

36" x 4' tall   

Vent Area=9 sq. ft. (0.84 sq. m.) 

Part Number 6609-9051 

 

36" x 10' tall  

Vent Area=9 sq. ft. (0.84 sq. m.) 

Part Number 6609-9052 

 
Accessories available include: 

 

CV Door Winter 24" (60.96 cm) Assy.   

 

Part Number 6409-3000 

 

CV Door Winter 36" (91.44 cm) Assy.   

 

Part Number 6403-3001 

 

Kit CV 24" (60.96 cm) x 4' (1.22 m.) tall Extension 

Part Number 6450-3032 

 

Kit CV 36" (91.44 cm) x 4' (1.22 m.) tall Extension 

Part Number 6450-3033 

 

Kit CV Flashing 24" (60.96 cm). 

 

 

Part Number 6450-3035 

 

Kit CV Flashing 36" (91.44 cm). 

 

 

Part Number 6450-3036 

 

3.

 

Limited Warranty 

All products are warranted to be free from defects in material and workmanship for a period of 
one (1) year from the date of purchase if installed and used in strict accordance with the 
installation instructions. Liability is limited to the sale price of any products proved to be 
defective or, at manufacturer’s option, to the replacement of such products upon their return. No 
products are to be returned to the manufacturer, until there is an inspection and/or a return-goods 
authorization (RGA) number is issued.  

 

All complaints should be directed first to the authorized distributor who sold the product. If 
satisfaction is not obtained or the name of the distributor is not known, write the manufacturer 
that appears below, directed to the attention of Customer Service Manager. 
 
This limited warranty is expressly in lieu of any and all representations and warranties expressed 
or implied, including any implied warranty of merchantability or fitness for a particular purpose. 
The remedy set forth in this limited warranty shall be the exclusive remedy available to any 
person. No person has authority to bind the manufacturer to any representation or warranty other 
than this limited warranty. The manufacturer shall not be liable for any consequential damages 
resulting from the use of our products or caused by any defect, failure or malfunction of our 
products. (Some areas do not allow the exclusion or limitation of incidental or consequential 
damages, so the above limitation or exclusion may not apply to you.) 

 

This warranty gives you specific legal rights and you may also have other rights that vary from 
area to area.

 

Warrantor

:

 

 

Hired-Hand Manufacturing, Inc.

 

 

 

  1733 Co. Rd. 68  

 

  PO Box 99 

 

  Bremen, Alabama  35033

Hired Hand 

Chimney Vent 

with 

Canopy 

Summary of Contents for 24" & 36" Chimney Vent













Reviews: