Version: 2011-UK-6
9
Take note of the following points:
!
The working area must be clear of any people and/or objects.
Danger of injury by collision!
!
Never step under a hovering load!
Danger of falling load!
!
If the vacuum level in only one of the 2 vacuum circuits drops below 60%, put the load
down
immediately
!
!
If one of the red lamps lights up, put the load down
immediately
!
Putting down the load.
Convey the lifted item to the desired place, and put it down. When the load has been placed securely, press
both buttons on the operating panel simultaneously. Now the air can flow to the suction plates, and the load
will be released immediately. Now a new work process can be undertaken.
!
Make sure the load is placed securely and that it cannot slide after being put down!
Handling of load (use of hydraulic cylinders)
The WinLet 350 is equipped with an electro-hydraulic system which makes it possible to move the lifting arm
of the machine in 4 different directions:
1.
Main cylinder, which positions the item roughly in the vertical position.
2.
Telescopic cylinder, which moves the item forward along the longitudinal axis of the machine.
3.
Tilting cylinder, which moves items from a horizontal floor – to a horizontal ceiling (180
degrees).
4.
Fine-adjustment cylinder, which moves the item in a 100% vertical line.
WinLet 350 also has a
multi-mobile front
, which makes the item manually manoeuvrable in all
dimensions. The front can be shifted sideways, turned 90 degrees to right and left, and rotated 360 degrees,
without limitation.
Use of hydraulic cylinders
Press the desired cylinder on the operating panel. An LED lamp will now show the selected cylinder. The
cylinder can then be moved in the desired direction at the desired speed by engaging the direction and
speed regulator.
Take note of the following points:
!
The working area must be clear of any people and/or objects.
Danger of injury by collision!
!
Never step under a hovering load!
Danger from falling load!
!
If the vacuum level in only one of the 2 vacuum circuits drops below 60%, put the load
down
immediately
!
!
If one of the red lamps lights up, put the load down
immediately
!
Note: Be aware that the capacity of the machine is reduced when using the
hydraulic cylinders.
