Troubleshooting
If you cannot connect the headset to your phone, do as follows:
1. Ensure the headset is charged then go through the steps listed to pair your headset.
2. Ensure that the Bluetooth feature is activated on your phone.
3. Check to ensure the headset is within 10 meters of your mobile phone or Bluetooth
device and that there are no obstructions that may prevent connectivity.
Call Handling
1. To make a call, use your mobile phone in the normal way when the headset is
connected to your phone. The audio will be directed to the headset.
2. If your mobile phone supports redialing via Bluetooth headsets, press the
key for 2 seconds to redial the last number called.
3. If your mobile phone supports voice dialing via Bluetooth headsets, press the
Answer/End key and proceed as described in the user guide of your mobile phone.
4. To answer a call, press the Answer/End key, or use the mobile phone call answer
button. If the automatic answer function is available on your mobile phone and
enabled, incoming calls will automatically be answered after one ring.
5. To end a call, press the Answer/End key while in a call, or use the call end button on
your mobile phone.
Adjusting the earphone volume
1. Press the volume key up to increase or down to decrease the volume during a call.
Battery information
1. Your device is powered by a rechargeable battery. The full performance of a new
battery is achieved only after two or three complete charge and discharge cycles.
2. Do not leave a fully charged battery connected to the computer or laptop, as
overcharging may shorten the rechargeable battery lifetime.
3. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if
damaged. Dispose of batteries according to local regulations. Please recycle when
possible. Do not dispose as household waste.
Care and maintenance
Your headset is a product of superior design and craftsmanship and should be treated with
care. The suggestions below will help you protect your warranty coverage. Keep all
accessories and enhancements out of the reach of small children.
1. Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can
contain minerals that will corrode electronic circuits. If your device does get wet, wipe
it dry immediately and allow it to dry completely.
2. Do not use or store the device in dusty, dirty areas. Its moving parts and electronic
components can be damaged.
3. Do not store the device in hot areas. High temperatures can shorten the life of