HIOTH
User Manual
HIOTH TECHNOLOGY CO.,LTD.
NOTES FOR THE DIAGRAM:
+12V
- constant power supply terminal, 12/24V DC
-GND
- ground terminal
SMOKE NC
-potential free, smoke sensor connecting terminals (for wired system)
TAMP NC
-potential free, tamper connecting terminals (for wired system)
SMOKE SENSOR INSTALLATION
1.
Before installation make sure the voltage supply is disconnected.
2.
If the sensor is hard wired to power source, drill holes in sensor’s cover. Note the sensor may
be connected to a wired alarm system controller or fire prevention system.
3.
Install the cover in desired location.
4.
If the sensor is to be VDC powered, connect wires observing Fig.1. If the sensor is to be
connected to alarm system, connect wires observing Fig.2.
5.
Screw the smoke sensor into the cover.
6.
Include the module into Z-Wave network(If the module is already include in the Z-Wave
network, wake it up by triple clicking the B-button) .
Fig.1- Power adapter connection
Fig.2-Alarm system hub connection
