HIOTH TECHNOLOGY CO., LTD.
USER MANUAL
www.HiotH.com
5)
When prompt a message “Request Access Success”, please go to the device list interface, and
refresh the device list, the device will be displayed.
NETWORK KICKOUT
1)
Make sure the device is connected to the power supply.
2)
Remove the device on the APP, then click "Save".
3)
Press and hold any key on the panel for 8 seconds (the LED on the panel will turn orange.).
4)
If network kickout is successful, switch will turn off, please go to the device list interface,
and refresh the device list, the device will not be displayed.
5)
If the device can still be displayed (network exclusion failed), repeat steps 2-5.
If the device:
Online: directly perform steps 1-5;
Offline:
disconnect the device first and then perform steps 1-5.
Safety Notice
A qualified electrician with the understanding of wiring diagrams and knowledge of electrical
safety should complete installation following the instructions.
Before installation, please confirm the real voltage complying with the device’s specification.
Cut off any power supply to secure the safety of people and device.
During installation, protect the device from any physical damage by dropping or bumping. If
happened, please contact the supplier for maintenance.
Keep the device away from acid-base and other corrosive solids to avoid damage.
Avoid overexertion during operation, to protect device from mechanical damage.
Read all instructions and documentation and save for future reference.
