background image

 

    

HIOTH

                                          User Manual

 

HIOTH TECHNOLOGY CO.,LTD. 

ID, then click "

". 

 

2)

 

Press the pairing button on the back in 8 seconds (open the rear lid). 

 

3)

 

When prompt a message “Request Access Success”, please go to the device list interface, and 

refresh the device list, the device will be displayed. 

 

Installation Instructions 

It’s recommended to install the Door/Window Detector in dry interior locations. 

Installation Tips 

The Door/Window Detector  installation is  very convenient. Even people who do not understand 

the knowledge of electrical equipment can be very convenient to install. You can  place it at any 

door / window. Just need to stick the back of the Door/Window Detector with double-sided adhe-

Pairing Button 

Summary of Contents for CT-SMEA2001-ID

Page 1: ...ief pushes the door the door and the door frame will displacement the door sensor and magnet will produce a shift and Door Window Detector will send alarm signals to remind staff to take safety measures The Door Window Detector is a device with built in EnOcean module This device can be included and operated in any EnOcean network with other EnOcean certified devices from any other manufactures It...

Page 2: ...ar energy or use CR1216 battery and the optional CR1216 battery not included for dark area use 5 years in total darkness Initial operation time in darkness 25 C typ 6 days min 90 hours if energy storage fully charged transmission of telegram every 25 min on average Operation start up time with empty energy store typ 2 5 min 400 lux 25 C incandescent or fluorescent light Temperature range 0 40 Work...

Page 3: ...he device will be displayed Installation Instructions It s recommended to install the Door Window Detector in dry interior locations Installation Tips The Door Window Detector installation is very convenient Even people who do not understand the knowledge of electrical equipment can be very convenient to install You can place it at any door window Just need to stick the back of the Door Window Det...

Page 4: ... the adhesive tape to fit detector on the door or window 3 Fit the magnet to the moving part of the door window opposite the detector using the adhe sive tape 4 Ensure that the parallel gap between the magnet and detector is less than 15mm and that the matching line on the magnet is pointing towards and aligned with the line on the detector 5 After proper installation and test put the battery cove...

Reviews: