11
■
Types of driver bits that can be used with the
VZ-4504 and VZ-4504PS.
•
For safe operation use bits conforming to the
standards indicated in the diagram on the left below.
The diagrams on the right indicate bits that cannot
be used with the Screw driver.
14mm
5mm wide
5mm wide Hexagonal Bit
(Caution)
When using the 5 mm
wide Hexagonal W Bit,
tighten the Phillips
adjustment screw
(supplied screw) tightly
into the driver bit chuck.
* If the Phillips adjustment screw
is not tightened for enough, the
driver bit will not be locked and
may result in unreliable screw
fastening.
Use the Phillips
adjustment screw (M2.6)
Tighten the Phillips
adjustment screw properly
6.
35
9.0
W bit
9.0
Bits whose
length from the
point to the
bearing groove
is not 9 mm.
Double recess
bearing groove
Use size 6.35
mm hexagonal
bits whose
length from the
point to the
bearing groove
are 9 mm.
Bits for use
Bits unsuitable for driver
