- 16 -
8. Specifications
Power supply
(Transformer type)
Input: AC100V 50/60Hz
Output: DC 12V 500mA
Dimensions (mm)
134(W) x 215(D) x 136 (H) mm
Weight (kg)
About 3.2 kg(including the rail)
Screw capacity
150 cc
Accessories
Operation Manual 1 copy
AC adapter 1 unit
Guide plate 1 piece
Hexagonal wrench (with the across flat
2mm) 1 piece
Screwdriver 1 piece
Specification
Screw
feeder
model
Specification of screw head
Shape of screw head
Screw
size
Screw
shaft
diaeter
(
∅
)
Screw head
diameter
(
∅
)
Washerdi-
ameter
(mm)
Screw head
thickness
(mm)
Screw shaft
length
(mm)
Pan
head*
1
Binding
Flat
head*
2
Counter
sunk
haed
Hex.
head
with
washer
face
HS-35
M3.5
3.3 - 3.7
4.8 - 10.7
4.8 - 13.2
0.5 - 8.0
4.1 - 18
○
○
○
○
○
HS-40
M4.0
3.8 - 4.3
5.4 - 10.7
5.4 - 13.2
0.5 - 8.0
4.6 - 18
HS-50
M5.0
4.8 - 5.1
6.2 - 10.7
6.2- 13.2
0.5 - 8.0
5.6 - 18
NOTES
- The transformer-type AC adapter attached to the machine has a
nominal output of DC 12V-500mA; during application, it is designed
to supply an average output at about 15V to the
screw feeder. In the
case where a different type of adapter or external power source is
used, it is recommended to use a 15V switching type adapter, or
regulated power supply which supply which can provide constant
output at 15V.
- *
2
Please consult your distributor for thin head.
- Check if the axis diameter of the loaded screw corresponds with the
below rail groove width.
- With therange of screw size and lenghts below, there may be instances if
unique screw shape or stracture not com; atible with the screw feeder unit.
- In the main body type, the main body model can be changed.
- To change the nominal diameter of loaded screw, replace it with a part
that is mentioned in the next page table.
- The rail, escaper, stopper assembly, escaper guide-right and passing
plate are otpional.
- The design, performance and specifications are subject to change
without prior notice for the sake of improvement.
- *
1
Sems, W-Sems, head with washer face can be used with the HS
series as long as those are within the specifications in the table below.
