Hioki TM6102, Communication Instruction Manual, Page: 40 / 60

35
(g) Radiometric Quantity Gain (Correction Function)
Set and Query Photometric Quantity Gain Function
Syntax
Command
:SCALe:PHOTometry:GAIN
<1/0/ON/OFF >
Query
:SCALe:PHOTometry:GAIN?
Response
<1/0(NR1)>
Description
Command
Sets the radiometric quantity gain function.
When the radiometric quantity gain function is enabled, the value set
by
:SCALe:PHOTometry:GAIN:DATA is added to the measured value of the
photometric quantity of the RGB mixed light.
When the command is accepted, the measured value is cleared and the
instrument enters the non-measurement state.
Query
Queries the currently set photometric quantity gain function.
Example
:SCAL:PHOT:GAIN ON
:SCAL:PHOT:GAIN?
1
Note
• When the photometric quantity gain is enabled, the tristimulus values XYZ of the RGB
mixed light are multiplied by the same gain value.
Set and Query Gain Value of Photometric Quantity
Syntax Command :SCALe:PHOTometry:GAIN:DATA
<Gain value(NRf>
Query :SCALe:PHOTometry:GAIN:DATA?
Response
<Gain value(NR3)>
<Gain value> = 1.00000E-3 to 1.3
Description Command
Sets the gain value of the radiometric quantity.
When the command is accepted, the measured value is cleared and the
instrument enters the non-measurement state.
Query
Queries the currently set gain value of the photometric quantity.
Example
:SCAL:PHOT:GAIN:DATA 0.1
:SCAL:PHOT:GAIN:DATA?
1.00000E-01
Note
• When the photometric quantity gain is enabled, the tristimulus values XYZ of the RGB
mixed light are multiplied by the same gain value.