Hioki MR8740, Instruction Manual

Page: 114 / 424

4.4 Managing Files
102
6
(When [Wave Binary] is the selected save type)
Select whether to save divided files.
Move the flashing cursor to the [Division] item.
Select
See: "About divided saving"(p.102)
(When [Text] is the selected save type)
Set the data thinning number.
Move the flashing cursor to the [Save Thin] item.
Select
7
Select the channels to save.
Move the flashing cursor to the save channel item.
Select
8
Execute the save operation.
Select [Exec] .
To cancel saving:
Select [Cancel] .
Off Files are not divided when saved. If a file is too large, it can-
not be saved.
16M, 32M, 64M Select the size for Divided Save.
Off Data thinning (sub-sampling) is not carried out.
1/2 to 1/1000 Set the thinning number (out of how many data items to
leave one data item remaining).
- Channel will not be saved.
o Channel will be saved.
Reset Return to previous settings.
Analog
Channels Logic
Channels Waveform Calculation
(When [Wave Calculation]
is [On] )
File name
The maximum number of characters for the [Save Name] string is 123. The
maximum path length including file name is 255 characters.
About divided saving
Large quantities of waveform data can be divided and saved as multiple files.
Saving divided data creates one or more waveform files and an index (IDX) file.
Then by loading the IDX file, the data in the waveform file(s) is loaded as a
batch.
See: "Batch load of waveform data"(p.99)
Other limitations
Text format data cannot be loaded into the instrument.