Hioki MR8740, Instruction Manual

Page: 111 / 424

4.3 Loading Data
99
4
Chapte
r 4 Saving/L
oading Dat
a & Ma
nagin
g Files
When the following index files are loaded, waveform data can be loaded as a batch. With the following
settings, index files are created along with waveform files.
Files with the following two extensions can be loaded:
You can load data for generated modules.
Data loading is performed on Signal generator sheet of Channel screen (
CHAN
key) or FILE screen (
FILE
key).
For details, see the instruction manual of Models U8793, MR8790, and MR8791.
Batch load of waveform data
Extension Explanation
IDX
Divided files are loaded together.
(To create index files: Use
[Division] at the [File Save] sheet of the System screen to set the dividing
size and then save. Note: If [Save type] is not [Wave Binary] , index files are not created)
See: "4.2.2 Automatically Saving Waveforms" (p.86)
"4.2.3 Saving Data Selectively (SAVE)" (p.91)
SEQ
(When using the memory division function of the memory function)
Waveform data of all blocks is loaded together.
(To create index files: At the
[Memory Div] sheet of the Status Screen, set [Memory Div] to [On] .
At the [File Save] sheet of the System Screen, set [Save Type] to [ALL-Wave Bin] .)
See: "11.1 Recording Settings" (p.239)
"4.2.3 Saving Data Selectively (SAVE)" (p.91)
Loading a waveform evaluation area (MR8741 only)
Extension Explanation
ARE
Loads waveform evaluation areas and settings data (files saved by selecting "Area settings"
when saving the data).
BMP
Loads waveform evaluation areas. (Files saved by selecting "Area image" when saving the
data can be edited on a computer and then loaded back into the instrument.)
Data Loading for Waveform Generation (Registration)
Extension Explanation
WFG,
TFG
The data for waveform generation is loaded in channels of a specified arbitrary waveform gener-
ator module. The waveform data loaded (registered) is output from Model U8793 Arbitrary Wave-
form Generator Unit.
Refer to"7.10
Register the Waveform in the U8793 Arbitrary Waveform Generator Unit "
(p.179)
PLS
The data for pulse pattern generation is loaded in channels of a specified arbitrary wave gener-
ator module.
The pulse pattern waveform loaded (registered) is output from Model MR8791 Pulse Generator
Unit.
FGP
The waveform generation program file is loaded in channels of a specified arbitrary waveform
generator module.