Hioki LR8450, Instruction Manual

Page: 176 / 310

173
Unit Measure Channel Trigger Alarm Calculation System
8
External Control (EXT. I/O)
This chapter describes how to control the instrument by
inputting signals to its external control terminals.
Signals corresponding to the instrument’s operation are
output from the external control terminals.
You can configure settings related to the external control
terminals on the [System] > [External] settings screen.
The external control terminals are not isolated (they use the
same ground as the instrument).
For more information about how to connect signals to the
external control terminals, see “External Control Connections”
in the Quick Start Manual.
8.1 Configuring Voltage Output (VOUTPUT) ............................ p. 174
8.2 Configuring Alarm Output (ALARM) ................................... p. 175
8.3 Configuring External Input/Output (I/O) Terminals ........... p. 177
External trigger input .............................................................................. p. 179
Trigger output ......................................................................................... p. 180
Simultaneously starting measurement using external triggers ............... p. 182
8 External Control (EXT. I/O)
8
External Control (EXT
. I/O)