Hioki LR8431, Instruction Manual

Page: 47 / 204

3.2 Operating Flow Overview
39
3
3
Chapt
er
3 Sett
ing be
fore M
easure
ment
Before measuring, configure the measurement settings on the [Setting] and
[CH] screens. A brief operational description of the currently selected (high-
lighted) setting item appears at the bottom of the screen.
Three recording methods are available. Timed recording, which record
between specified start and stop times, can be used in combination with these
methods (p. 76).
Measurement Configuration (Setting Screen)
Recording Method Description
Normal Recording
Records for the specified recording length beginning
when measurement starts (Cont: Off).
Continuous Recording
Records continuously beginning when measurement
starts (Cont: On).
Repeat Recording
Records repeatedly for the specified recording length
(time span) (Repeat: On).

. Must be set before measuring.
Make other settings

as needed.

Save automatically
while measuring

(p. 46)


Reloading Settings

(p. 103)

Saving Settings

(p. 102)

Enter a title for mea-
surements (p. 60)

Filter out noise

(p. 45)

Perform numerical
calculations (p. 113)

Record by timer

(p. 76)

Configure recording settings: [Setting] screen

Data recording (acquisition) interval (p. 42)*

Display time base (time per horizontal division) (p. 43)

Recording start/stop method (p. 44)*

Recording length (time span) for repeated or one-time re-
cording (p. 45)*
Horizontal Axis (Time Axis) Settings