13
LAN Settings and Connection
Connecting a LAN Cable
Use a LAN cable to connect the instrument and computer.
Required items:
When connecting the instrument to an existing network (prepare any of the following):
•
Straight-through Cat 5
,
1000BASE-T-compliant Ethernet cable (up to 100 m
,
commercially available).
For 100BASE/10BASE communication
,
a 100BASE-TX/10BASE-T-compliant cable may also be used.
•
Hioki 9642 LAN Cable (option)
(A cross adapter cannot be used.)
When connecting one instrument to a single computer (prepare one of the following):
•
1000BASE-T-compliant cross-over cable (up to 100 m)
•
1000BASE-T-compliant straight-through cable with cross-over adapter (up to 100 m)
•
Hioki 9642 LAN Cable (option)
SPEED LED
On (Green) :1000BASE
On (Orange) :100BASE
Off:10BASE
LINK UP LED
On: Link up
Off: Link down
Blinking: Sending or
receiving data
The MAC address of the LAN is displayed below the serial number.
You can also check it on the instrument screen.
See: “Checking the Version of the Instrument” in the instruction manual.
When connecting the instrument to a single computer (connect the instrument to the computer)
Connecting with the 9642 LAN Cable and crossover adapter (supplied with the 9642)
Connect the LAN Cable to the
crossover adapter.
LAN interface
Crossover adapter
Connect the LAN Cable to the
100BASE-TX connector on the PC.
Connect the crossover adapter
to the LAN interface on the
instrument.
1
2
3
2
Summary of Contents for IM7580A-1
Page 3: ...Contents ii ...
Page 5: ...2 Safety Information ...
