Hioki HiTester 3443-01, Instruction Manual

Page: 17 / 46

5
―――――――――――――――――――――――――――
Chapter 1 Summary
――――――――――――――――――――――――
①
Lens
Infrared rays from the object whose temperature is
to be measured are received here.
②
Laser marker beam emission openings
The laser marker beams are emitted from here.
③
Time key
Used to set the time and to check the time of stored
data.
④
Parameter adjust keys
Used to change the date, time, and emissivity, and
to increase/lower the memory data No.
・▼
key: Decreases
・▲
key: Increases
If either of these Parameter adjust keys is held
down, the numerical value changes rapidly in the
appropriate direction.
⑤
Clear key
Used to set the date and to clear displayed memory
data.
⑥
MEAS
key
Performs measurement while
MEAS
is being
pressed.
Measured value is held when the key is released.
There is no power switch.
Pressing the
MEAS
key turns ON the power. Power
is cut OFF in about 15 sec. if the key is not pressed,
except output to printer (automatic power OFF).