Hioki HiTester 3443-01, Instruction Manual

Page: 11 / 46

vii
―――――――――――――――――――――――――――
Notes on Use
――――――――――――――――――――――――
CAUTION
･
This unit has been constructed with some degree of
water resistance, but if it is subjected to direct
contact with water for a long period of time, water
may get into the unit. Further, water drops left on
the lens will cause measurement errors. Wipe off
any water drops promptly.
･
Do not use the unit where it may be exposed to
corrosive or explosive gases. The unit may be
damaged, or explosion may occur.
･
To avoid damage to the unit, do not subject the
equipment to vibrations or shocks during transport
or handling. Be especially careful to avoid dropping
the equipment.
･
Do not point the lens at the sun or at any other
source of strong light. If you do, the sensor may be
damaged.
･
Do not contact the lens against the object whose
temperature is to be measured, or get it dirty, allow
it to be scratched, or allow any foreign material to
adhere to it. Doing so may cause errors.
NOTE
･
Before use, verify that no damage has occurred due
to careless storage or transport, and check the
appearance and operation of the unit.
･
When the mark on the display is flashing, the
battery are low. Fit new battery.