Hioki FT3424, Instruction Manual, Page: 131 / 166

47
/RJJLQJ,OOXPLQDQFH'DWD2XWSXW)XQFWLRQ
3.7 Logging Illuminance Data
(Output Function)
You can connect the instrument to a logger or other recording
instrument and have it generate voltage output based on the
measured values.
This functionality outputs a voltage of 1 mV DC for each effective
count digit in the measured value. The voltage is updated at the
same rate as the instrument’s LCD.
CAUTION
To avoid damaging the output cord, unplug it by grasping
the connector, not the cord.
‡ :KHQXVLQJWKHRXWSXWIXQFWLRQ287387WKHIROORZLQJ
functions are disabled.
Auto power off function
Memory function
Auto range
‡
When using the output function for an extended period of time,
connect a USB cable to the instrument so that it operates on
USB bus power.
‡ ,IWKHRXWSXWFRUGLVSOXJJHGLQZKHQWKHLQVWUXPHQWLVWXUQRQ
a signal of +2.5 V will be output temporarily; however this is not
a malfunction.
1
2
3
4
5
6
7
付録
索引
www. .com
information@itm.com 1.800.561.8187