Hioki FT3424, Instruction Manual, Page: 129 / 166

45
Saving Measured Values (Memory Function)
Reading the saved measured values (READ)
Memory No. y y y y y y y y y y y y y y y y
1
Press and hold (READ).
( and appear.)
The instrument enters the read mode,
which is used to read the measured
values saved in the internal memory.
2
Select the desired memory No.
using
or . (upper right
side of the LCD)
Continuously increase or decrease the
memory No. by pressing and holding
or .
and can only be operated
when there are multiple measured values
stored in the internal memory.
The backlight automatically turns on
when you read the measured data of the
internal memory in low-light environments
(approx. 750
lx
or less).
Canceling the read mode
Press (ESC). ( goes off.)
When the measured values are not saved
When the measured values are not saved
in the internal memory, press
(READ)
and
[ - - - ]
appears on the LCD for approx.
1 second, and then the measurement display
reappears.
1
2
3
4
5
6
7
付録
索引
www. .com
information@itm.com 1.800.561.8187