DT4261 DIGITAL MULTIMETER Remote Operation Manual
P3/11
1. Remote Interface Overview
Step1. Connect the USB cable to the USB port on the computer.
Step2. Once the USB cable is connected and the USB driver is installed, a virtual COM port
is created on the computer.
2. Interface Parameters
In order to operate the meter via a host computer or terminal, the parameters in interface
within the DT4261 have to match the parameters the serial interface provided by the host or
terminal.
The following procedures will guide to set up interface parameters within these models.
Table.1
Item
Parameter
Setting
1
Baud Rate
9600 bps
2
Data Length
8 bit
3
Parity Check
None
4
Stop Bit
1 bit